@01:29:53.84PDT14-Apr-24 <MAIN> 
Environmental Sample Processor built 20-Feb-24 (b91d4858)
@01:29:55.16 ESP2 v3.41 I2C Gateway v3.20 for core bus
@01:29:57.62 Configuration for bruce 5/18/23 by brent@mbari.org
/home/esp/esp2/type/shallow/bruce/configure.rb
@01:30:01.63 Polling Can every 10:00
@01:30:01.71 Cleanly exited at 01:29:19PDT14-Apr-24
@01:30:02.20 Clients may connect on TCP port 9999
@01:30:02.22 Waiting for espclients...
@01:30:27.20 <brent> Session Begun
@01:31:02.77 -> runMission '24mcCloud'
#<ScheduleThread:"24mcCloud" priority=1 run>
@01:31:03.68 <Qmail> GoodNews.email "Starting 24mcCloud w/pucks in tube 2\n{1 => 18,\n 2 => 4,\n 3 => 22,\n 4 => 22,\n 5 => 22,\n 6 => 22,\n 7 => 22}\nCan@01:30:01, 49% Wet!, 9.6C, 93% humidity, 14.6psia, 13.336V, 0.140A, 0.140A avg, 1.86W",Subject: "24mcCloud begun"
@01:31:04.64 <24mcCloud> Preparing to sleep until 20:00:00PDT14-Apr-24
@01:31:04.69 <shutdown> Shutdown
@01:31:04.71 <24mcCloud> Asleep til 20:00
@01:31:04.75 Continuing at 20:00
@01:31:36.25 <Qmail> GoodNews.email "Then, in tube 2:  #initialPurge; standAloneWCR\n/home/esp/esp2/mission/24mcCloud.rb:50\n{1 => 18,\n 2 => 4,\n 3 => 22,\n 4 => 22,\n 5 => 22,\n 6 => 22,\n 7 => 22}\nCan@01:31:04, 49% Wet!, 9.6C, 93% humidity, 14.6psia, 13.331V, 0.164A, 0.170A avg, 2.19W",Subject: "Asleep until 20:00"
@01:32:00.03 <brent> -> exit
@01:32:00.05 Session Ended
@01:32:01.95 <uploadLog> upsync
@20:00:00.08 <24mcCloud> Gate.power :core,:OFF
@20:00:00.10 I2C::Bus::Error in 24mcCloud -- Cannot start bus due to WATER ALARM!
@20:00:02.63 Gate.power :core,:OFF
@20:00:02.64 I2C::Bus::Error in 24mcCloud -- Cannot start bus due to WATER ALARM!
@20:00:05.16 Gate.power :core,:OFF
@20:00:05.19 I2C::Bus::Error in 24mcCloud -- Cannot start bus due to WATER ALARM!
@20:00:07.71 Gate.power :core,:OFF
@20:00:07.73 I2C::Bus::Error in 24mcCloud -- Cannot start bus due to WATER ALARM!
@20:00:10.25 Gate.power :core,:OFF
@20:00:10.28 I2C::Bus::Error in 24mcCloud -- Cannot start bus due to WATER ALARM!
@20:00:10.29 Waiting to Resume from Checkpoint "Continuing at 20:00"
@20:00:10.31 <Qmail> BadNews.email "Cannot start bus due to WATER ALARM!",Subject: "I2C::Bus::Error in 24mcCloud"
@20:01:08.96 <uploadLog> upsync
@21:06:25.52 <brent> Session Begun
@21:06:42.97 -> upsync
@21:07:12.90 <uploadLog> upsync

@21:07:46.74 <brent> -> can
Can@21:07:46, 62% Wet!, 7.4C, 97% humidity, 14.8psia, 13.356V, 0.140A, 0.140A avg, 1.87W
@21:08:11.63 -> Power
{analytic1: false,
 analytic2: false,
 analytic3: false,
 camera: false,
 core: false,
 raw: false,
 sampler: false}
@21:08:19.00 -> exit
@21:08:19.02 Session Ended
@08:48:52.40PDT15-Apr-24 <espclient> Session Begun
@08:49:25.73 -> `victron up`
Enabled Victron network access!!
@08:49:53.09 -> Can
Can@08:40:03, 59% Wet!, 6.9C, 105% humidity, 14.8psia, 13.684V, 0.134A, 0.134A avg, 1.83W
@08:52:58.45 -> `victron down`
Disabled Victron network access
@08:53:07.34 -> exit
@08:53:07.36 Session Ended
@14:15:11.12 <brent> Session Begun
@14:15:29.06 -> can
Can@14:15:29, 31% Wet!, 16.9C, 76% humidity, 14.4psia, 13.605V, 0.134A, 0.134A avg, 1.82W
@14:15:53.70 -> quit
@14:15:53.72 Session Ended
@10:41:39.25PDT16-Apr-24 <mccloud> Session Begun
@10:41:45.12 -> can
Can@10:41:45, 36% Wet!, 14.1C, 91% humidity, 14.5psia, 13.595V, 0.134A, 0.134A avg, 1.82W
@10:42:22.63 -> showlog -25

@10:43:08.41 -> ESP.shutdown!
@10:43:08.43 NoMethodError in mccloud -- undefined method `shutdown!' for ESP:Module
@10:43:12.43 -> ESP.shutdown
@10:43:12.45 <shutdown> Shutdown
@10:43:12.49 <mccloud> Asleep / Shutdown

@10:43:18.06 -> exit
@10:43:18.08 Session Ended